UV Lights for HVAC Systems, are they worth the money?

The thought of mold and bacteria multiplying in the HVAC system and being circulated through ductwork is troubling to anyone who wants a sanitary home. It can be a serious threat to those with breathing issues such as asthma and C.O.P.D.

You’ve heard that ultraviolet lights effectively sanitize air and equipment. Is this true? How much do they cost? Are they worth it?

These are the questions answered in this guide to UV light cost and effectiveness.

Do UV Lights Kill Mold and Bacteria?

UV works! Ultraviolet lights were shown to kill mold, viruses and bacteria more than 100 years ago. In fact, in 1903, Niels Finsen was given the Noble Prize in Medicine for using UV to effectively treat patients with skin infections.

Today, UV lights are used for germicidal use in hospitals, restaurants and grocery stores. And they have been shown effective in killing sterilizing an HVAC system.

UV Light Options for your HVAC System

Two types of UV lights are made for sanitizing your heating and air conditioning system. They have various names including purifying lights, germicidal lights, sanitizing lights and sterilization lights.

Coil Sanitizing Lights:

If you have central air conditioning, then you have an indoor coil. It is a prime location for the development of mold and bacteria. Why?

Because the coil is used to condense moisture from the air to dehumidify your home during AC cycles. As air passes over the coil, dirt, pet dander and other debris stick to its wet surface. The combination creates an ideal setting for the growth of mold and bacteria that can be spread through your home in the passing air.

Coil UV lights are the most common HVAC sterilizing lights. Single-lamp and dual-lamp models are produced. Coil sterilization lights are installed where they can shine directly onto the surface of the coil, and they are left on continuously.

Air Sanitizing Lights:

This type of HVAC germicidal lights are installed in the ductwork bringing return air to the system. Their purpose is to kill airborne germs and mold. Stick and U-shaped lamps are used by various manufacturers.

Some air germicidal HVAC lights are coordinated with the blower motor to turn on and off as it does. These must be hardwired with the system, so installation cost is on the high end of the spectrum.

How Much do UV Lights Cost?

There are four costs associated with germicidal HVAC lights: Fixture cost, installation cost, replacement lamp cost and energy cost.

NOTE: Prices may vary.

The most popular lights for both the coil and the air ducts cost $80 to $125. Most lower-cost units use a single lamp. Those with higher cost use two lamps and, for air sterilizing UV lights, also include an air filter to clean the air of allergens.

Lamp life is 9 to 14 months for most brands, so expect to spend an average of $15-$50 per year for new lamps depending on whether you install a unit with one lamp or two.

DIY Installation is Possible

Many UV lights for HVAC systems include a 110V plug. They aren’t hardwired. Some have a magnetic mounting bracket for quick, simple installation. The process requires accessing the coil cabinet or ductwork, using sheet metal screws to install a light that doesn’t have a magnetic bracket, and plugging it in.

If you have DIY skills that are at least mid-level, then you might be able to save installation cost by doing it yourself. Complete instructions are included with most lights. We don’t recommend hard-wiring a light yourself – only installing those with a power cord plug.

Note: Be sure to seal up ductwork after installation using pro-grade duct tape or mastic. Air leaks allow contamination of the system, hurt efficiency, reduce indoor comfort and can be noisy.

Additional Benefits

Bacteria and fungus cause two additional problems that are eliminated when they are. First, they cause odors including a musty smell that can infiltrate your whole house.

Secondly, the buildup of the organisms might eventually clog the drain inside your HVAC air handler or furnace. When this happens, AC condensate will eventually leak. This increases the potential for mold and mildew growth and might also cause water damage.

What Else Should Be Done to Prevent Problems?    

UV lights are part of the solution to keeping your HVAC system and ducts clean and healthy. There are three additional steps you can take.

Keep filters clean or fresh: If your filter is washable, wash it per manufacturer’s instructions. If it is a replacement filter, change it every month if you have pets, you smoke or you live in a dusty environment. Otherwise, it can be changed every six weeks to three months depending on how heavily your HVAC system works. Remember, the filter needs attention during AC seasons too, not just when heating.

Use a high-MERV filter: These filters remove smaller particles from the air, so less debris gets into your HVAC system where it can promote bacteria and fungus growth. If you have an older or cheap furnace, it might not be suitable for a high-MERV filter. Check with your HVAC technician or the furnace owner’s manual.

Seal ductwork properly: Gaps in ducts allow dirt, debris, allergens and other impurities to be pulled into the system. Duct sealing eliminates that. Plus, it prevents wasted heat and AC, so can reduce your HVAC costs by 20% to 30% according to Energy Star.

Are UV Lights for HVAC Worth the Cost?

After the cost of the light or lights you choose, you can expect to spend $45 to $70 per year to pay for the energy they use and for replacement lamps. Is it worth it?

Your health provides the answer. If you and household members do not have breathing issues or allergies and if you’re not experiencing higher-than-normal rates of colds and other viruses, then you probably don’t need germicidal UV lights in your HVAC system.

However, some might be reading this post because those problems are a reality in your home. For you, HVAC UV lights can be part of the solution. We recommend these steps:

1). Have your furnace or air handler and coil thoroughly cleaned

2). Seal ducts to prevent infiltration of contaminants

3). Ask your technician if a high-MERV filter is right for your furnace or air handler, and install one if so

4). Have a UV coil light installed, since the coil is the primary location for the growth of fungi and bacteria

5). If your issues are severe, have a UV air sanitizing light installed in the duct

6). Remember to clean or replace your filter as recommended

If you’d like to discuss having your HVAC system cleaned or UV germicidal lights installed, consider using our Free Local Quotes service. You’ll get your questions answered, and if you want estimates for having the work done, they will be provided. There is no cost or obligation to you for using the free service.